Individual Components

Surface or Groove Mounted C Shape Channel These are formed to an internal radius of 40mm Can be used to enable a door to travel over the top or to the side which would allow for additional door travel

Provides a full square edge finish to the door. Also enables a self-adhesive magnetic strip to be applied if the door is to run horizontally Lock could be fitted if required

Surface or Groove Mounted C Shape Channel To be fixed using screws countersunk into the channel Supplied in a pair, each track is 1 metre in length?

50m of self-adhesive tape to apply to the rear of the tambour door

Surface Mounted The straight track has a flange for screw fixing Complete with double sided tape for easy fixing Supplied in a pair, each track is 1 metre in length?

Groove Mounted Can be used to produce any curved shape Can be bent by hand to an internal radius as small as 35mm Amazing design opportunities

Self-adhesive to be applied to the edge of the bottom bar if the door is to run horizontally (sideways) if installed into a vehicle/caravan. Helps to keep the door closed.

The front faces of the handle are foiled to match the slats

Surface Mounted 120mm in diameter Allows door travel of up to 750mm Pre- drilled with tabs to avoid the need to drill through the channel 3 tapered lead in edges Provides a smooth run between the track and spiral

19mm wide Flat Profile Available in a range of finishes Our door slats exceed the flamability test standards for automotive use (ISO:3795) Pivots from the front If the door is to have an exposed external curve the gap between the slats remains small. If the tape is removed from the rear the door can...